We are going to Flash Stock Rom on Asus Memo Pad 8. In this guide, we have used Intel Flash Tool to flash the Stock Firmware on Asus Memo Pad 8 And we include an Official link to Download Asus Memo Pad 8 Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out. To perform this advanced process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment. Read More – Check whether my one is Intel Chip or any else
Intel Flash tool, which we are discussing today, will only work with Intel Flash devices that are running on Intel Flash. So, kindly check out the device thoroughly before trying anything blindly.
Why I want to Flash Stock Firmware
If you have an Android device, you may require flashing Stock ROM/Firmware under various circumstances. If you have flashed custom ROM, Custom recovery, or Custom kernel and facing several issues or if you want to Full Unroot, Unbrick, Rollback, Fix Slowing Down, then you have to flash stock ROM to bring your device back to its original state. Read More – Stock Rom vs Custom Rom
Flash Stock Rom on Asus Memo Pad 8
Proceed at your own risk. flashstockrom.com will not be responsible for any mistake and any damage that might occur to your device while performing the following operation.
Preparation for Flashing Stock Firmware on Asus Memo Pad 8
Step 1 :
First download the Intel drivers. Then install it in to your PC.
Step 2 :
Step 3 :
Power off your Asus Memo Pad 8 device.
Step 4 :
Step 5 :
When tool is launched click the browse button.
Step 6 :
Now locate the flash.xml file. (you can find this in the above file that you downloaded before.) Read More: Increase Ram Size on your Device
Step 7 :
Connect your device to the PC. (make Sure it is Power OFF and it is in the fastboot (Download Mode))
Step 8 :
When you connect your device flash tool will show it in the tool.
Step 9 :
Click the start flash button to start the flashing process.
Step 10 :
You can see the process progress from the bar at the right hand side. Read More : Enable OTG (pen) on Your Device
Step 11 :
- When the flashing process over you can see the done message.
- Now close the flash tool then disconnect your device.
Done now you successfully flashed your device.
Frequently Asked Questions Listed Below
I can’t Flash Stock Firmware on Asus Memo Pad 8.
Follow Above Ultimate Guide Step By Step. Do it again with fresh Intel Tool and Fresh Firmware. Your problem persists then Leave a Comment With Full details about the error (If you can upload ScreenShot, upload it). Then our team will help you.
Asus doesn’t turn on, or respond to power button ( Dead/Soft Brick).
- Make sure a formatted SD CARD is present in the phone before proceeding to flash.
- After that Give up to 15mins for first boot.
- Finally Find Rom from alternative source.
- Read More
Asus Memo Pad 8 Doesn’t not pass boot logo/bootloop
After Flashing, the Asus phone doesn’t pass the boot logo that means, there is something wrong with your Asus Memo Pad 8. However, let it start 15 minutes at least because this is the first boot. After that, if any Problem persists then Try to hard reset and do the Flash again.
Thank you for coming to our Page. If this page helped you, So then please share this “Flash Stock Firmware on Asus Memo Pad 8” Post to all Social media like Facebook, Twitter, and Reddit so then Others can find this Asus Guide. Finally, If you have any problem then don’t hesitate, feel free to Leave a Comment with an Error Message. So one of the team our team members will help you as soon as possible.