How to flash Stock firmware on any Huawei Smartphones:


Flashing Stock firmware on Huawei Smartphones:

Hi everyone, welcome back! Today I’m going to pass you the user guide for flashing stock firmware on Huawei smartphones. You can follow the same procedures to flash any Huawei smartphones.


  1. It is always better to have the data back-up when we are dealing with the firmware and flashing things.
  2. Charge up your phone to at least 50-60 %, since the flashing takes some time and to be on the safer side.

Now if you are met with the pre-requisites, then start following the below mentioned steps one by one sequentially.

Step 1: 

Create a new folder on your SD card and name the folder as dload.

Step 2:

Download Huawei Firmware 

Download the Huawei Smartphone firmware on the computer from which you are conducting the flashing from.

Step 3:

No ? then Extract the downloaded file and find for

Step 4:

Take a copy of the browsed file and paste the same copy to the newly created folder on your SD card.

Step 5:

Now power off the Huawei device.

Turn off the Device


Start Flashing Stock Rom on huawei Device

Step 6:

Now hold the power+ Volume up+ Volume down buttons simultaneously for about 8-10 seconds until the flashing process starts automatically.

Step 7: 

Wait patiently till the flashing completes. It may vary from 5-15 minutes depending on the requirement. Do not press any button until it completes.


Step 8:

The device reboots once the update process is done, wait for the device to restart and it should work properly.

Old One ? then


Congratulations! You must have flashed your Huawei device successfully by now. This is one of the steps of flashing by turning the device off. We can also do the flashing without switching the device off. But, I always recommend the above mentioned steps, as it is the ideal one. Now, I will tell you the flashing steps without switching the device off.

Flash Stock Rom on huawei Device without Turn Off

Step 1,

Follow the same procedures from Step 1 to 4.

step 2,

open Settings-> your Huawei smartphone ->About phone -> System update -> Local update.

Step 3,

Now tap the Update Option


Related Problems


I can’t Flash Stock Rom on Huawei Hurricane .

Do it again with fresh Files. Your problem is persist then Leave a Comment With Full details about error. Then our team will help you. Or try this Tool

 Huawei  doesn’t turn on, or respond to power button ( Dead/Soft Brick).

  • After that Give up to 15mins for first boot.
  • Finally Find Rom from alternative source.
  • Read More

Huawei Doesn’t not pass boot logo/bootloop

After Flashing,  Huawei phone doesn’t pass the boot logo that mean,there is something wrong with your Huawei Hurricane . However let it to start 15mins at least because this is first boot.After that if any Problem persists then Try to hard reset and do the Flash again. Or try this Tool

Huawei Hurricane  stuck at boot/ continuously restarts/ keep rebooting

first time it may give this kind of things. wait and watch. first boot may be slow. if Problem persists then Try to hard reset and do the Flashing Stock firmware on Huawei Hurricane  again with fresh Files. 

USB device not recognized

This is not related to Sp Flash tool. seems like this is error of your USB port for the reason that you get this error.Then you can fix it from here

Huawei Device auto restarting

  • It may be your  Huawei case is pressing on it (Clean the power button.)
  • or May be, your current stock Rom is damaged or Corrupted. So you have to Install Stock Rom/custom Rom to your device. use this post to Flash new Stock Rom.

Thank you for coming to our Page. If this page helped you , So then please share this website to all Social Medias like Facebook ,twitter and Reddit so then Others can find this Huawei Guide. Finally If you have any problem then don’t hesitate, feel free to Leave a Comment with Error Message.So one of team our team member will help you as soon as possible.

Leave a Reply