Flash Stock Firmware on Gionee M7 Plus | Ultimate Guide
Flash Stock Firmware on Gionee M7 Plus
Are you struggling with your Gionee M7 Plus and considering a firmware update? You’ve landed in the right place. This article will guide you on how to flash stock firmware on Gionee M7 Plus, ensuring your device runs smoothly and efficiently. Whether you’re a tech-savvy individual or a novice, our step-by-step guide will make the process easy and hassle-free.
The Gionee M7 Plus is an impressive device, yet like all smartphones, it can encounter software problems as time passes. This is when the need to flash stock firmware on Gionee M7 Plus arises. This procedure reinstates your phone’s software to its original factory settings, eradicating any bugs or issues that might have emerged. So, let’s delve into the process and discover how to restore your Gionee M7 Plus.
Table of Content
Why SP – Smart Phone flash tool?
The SP Flash Tool, also known as the Smart Phone Flash Tool, is a versatile cross-platform application that we often use to flash stock firmware on Gionee M7 Plus. This tool is not just for flashing custom recovery or fixing hard-bricked devices, but it’s also incredibly user-friendly, making it ideal for both tech-savvy individuals and beginners.
Specifically designed for Mediatek devices, the SP Flash Tool allows you to flash stock firmware on Mediatek smartphones and tablets, including the Gionee M7 Plus. However, it’s important to note that this tool is not compatible with devices that use chipsets other than MediaTek. So, if you’re a Gionee M7 Plus user, this tool is a perfect fit for your firmware flashing needs.
Read More – Check whether my one is Mediatek or any else
Why I want to Flash Stock Firmware on Gionee M7 Plus?
If you own an Android device, there might be situations where you need to flash Stock ROM/Firmware. Suppose you’ve flashed custom ROM, custom recovery, or custom kernel and are now facing several problems, or if you desire to fully unroot, Unbrick, and back, then you must flash stock ROM. This process will bring your device, like the Gionee M7 firmware, back to its original condition. Read More – Stock Rom vs Custom Rom
If you’re looking to upgrade your Gionee M7 Plus, you’ll need to find an upgraded Stock/Custom Rom – be it Kitkat, Marshmallow, or Nougat. We recommend using only Official Rom to flash stock firmware on Gionee M7 Plus, as all glitches and bugs have been debugged in these versions. Plus, with Official Rom, you can access the latest OTA updates and install them seamlessly.
Flash Stock Rom on Gionee M7 Plus | Quick Steps
REQUIRMENTS
- Read More – Increase RAM SIZE after root on Gionee?
- Download the suitable Stock Rom for your device.
- Original USB cable and working PC.
- Make sure you have a complete backup of your device
- Maintain the battery charge percentage least 60%.
DISCLAIMER
Please be aware that proceeding with the following steps involves a certain level of risk. The process of flashing stock firmware on your Gionee M7 Plus, if not done correctly, could potentially lead to damage to your device.
The website flashstockrom.com, while providing comprehensive guidance, cannot be held accountable for any errors made or damage incurred during this process. It is crucial that you follow each step meticulously and do not skip any part of the instructions. This is to ensure the safety and integrity of your device throughout the process. Remember, you are proceeding at your own risk, so exercise caution and diligence at all times.
Full Guide about SP Flash Tool – For beginners
Preparation- Flash Stock Firmware on Gionee M7 Plus
STEP 1 :
- First Get Full Back up of your Gionee.
- Download and install Android USB Driver on you pc. In case Android
USB drivers are already installed on your computer then skip this step.
STEP 2 : After that power off your Gionee and Remove the Battery(if it is removable).
STEP 3 : Then Download SmartPhone (SP) Flash Tool on you computer. Once downloaded, extract the SP flash Tool Zip file.
Download Stock rom For Gionee M7 Plus
STEP 1: Download and Extract the Stock ROM for your device according to its model number. A wrong stock ROM can damage your device. Read More – After Root, What can Do
STEP 2 :
- Open Flash_tool.exe (you will find this from the extracted Sp Flash files)
- After that if any Warning pop-up appears on your screen click YES.
STEP 3 : After that click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 4: In the Download Tab, you should click on the scatter-loading button.
STEP 5 : After that Locate the scatter file (you will find the scatter file in the Stock ROM folder).
now press on Download button just below the Download tab. Read More – Enable OTG support on Gionee Device
STEP 6 : After that connect your device to your computer using a USB cable. Just press the volume buttons a couple of times so that computer detects your device.
Installing Stock Rom on Gionee M7 Plus
STEP 1: Then The flashing will begin automatically Once your device is recognized, Read More – Increase Internal Rom SIZE After Root on Gionee.
STEP 2: Finally when the process is completed a Green Ring will appear .
Conclusion
In conclusion, learning how to flash stock firmware on Gionee M7 Plus can be a lifesaver when you’re dealing with software issues on your device. This process restores your phone to its original factory settings, eliminating any bugs or glitches that may have crept in over time. With the right tools and guidance, you can easily perform this task and ensure your Gionee M7 Plus runs smoothly and efficiently.
Remember, while the process might seem daunting at first, with a bit of patience and careful following of the steps outlined in this guide, you can successfully flash the firmware on your Gionee M7 Plus. So, don’t let software issues hinder your smartphone experience. Take control and breathe new life into your device today.
Frequently Asked Questions (FAQ)
Q: I can’t Flash Stock Firmware on Gionee M7 Plus.
If you’re unable to flash stock firmware on Gionee M7 Plus, consider these essential steps:
- Confirm you have the right firmware file for your Gionee M7 Plus.
- Ensure your device’s battery is sufficiently charged.
- Check that the correct Gionee M7 Plus drivers are installed on your computer.
Q: Gionee Doesn’t pass boot logo/boot loop after flashing Gionee m7 firmware
If your Gionee M7 Plus is stuck in a boot loop after flashing the firmware, follow these crucial steps:
- Perform a factory reset via the recovery mode.
- Re-flash the firmware, ensuring you’re using the correct and latest version.
- If the issue persists, consult with a professional or the Gionee support team.
Q: Gionee M7 Plus stuck at boot/ continuously restarts/ keep rebooting
- Soft Reset: Hold the power button on your Gionee M7 Plus until it turns off, then turn it back on.
- Safe Mode: Boot your Gionee M7 Plus in safe mode by holding the power and volume down buttons until the Gionee logo appears.
- Flash Stock Firmware: If issues persist, flash the Gionee M7 firmware on your device. Follow the manufacturer’s instructions carefully.
Q: Gionee M7 automatically disconnecting during flashing
A: If your Gionee M7 Plus disconnects during flashing, consider these essential steps:
- Check USB Cable or Port: Use a different cable or port to see if the issue persists.
- Install Correct Drivers: Make sure the correct drivers for your Gionee M7 Plus are installed on your computer.
- Ensure Sufficient Battery Level: Your device should have at least 50% battery before starting the flashing process.
- Verify Software Compatibility: The software used for flashing should be compatible with your device and firmware.
Q: BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
- Make sure that the file(s) you’re trying to flash are actually for your exact phone model
- After that ensure you tick the boxes for only the files present in the ROM you’re about to flash
- You probably might have the wrong driver installed. Uninstall VCOM, PRELOADER and MTK drivers using USB DEVIEW then manually re-install using this Read More
Q: 4001 ERROR – S_FT_DA_NO_RESPONSE or Da didn’t send response data to FlashTool!
- Try changing the USB-port
- After that Then run SPFLASH TOOL as ADMIN.
- After that make sure you have the correct drivers installed
- Read More.
Q: BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
• After that Try using a higher version of SPFLASH TOOL.
• After that try changing the USB cable and port or the PC itself.
• Finally use the format option first then download in SPFLASH TOOL.
Q: Gionee Device auto restarting
- It may be your Gionee case is pressing on it (Clean the power button.)
- or May be, your current stock Rom is damaged or Corrupted. So you have to Install Stock Rom/custom Rom to your device. use this post to Flash new Stock Rom.
We appreciate your visit to our page. If you found our guide on how to flash stock firmware on Gionee M7 Plus helpful, please consider sharing our website on all social media platforms like Facebook, Twitter, and Reddit. This way, others can also benefit from this Gionee M7 firmware guide. Lastly, if you encounter any issues, don’t hesitate to leave a comment with an error message. One of our team members will assist you as soon as possible.
Lucas Noah is a tech-savvy writer with a solid academic foundation, holding a Bachelor of Information Technology (BIT) degree. His expertise in the IT field has paved the way for a flourishing writing career, where he currently contributes to the online presence... Read more
