How to fix a Samsung Galaxy Watch that won’t update

How to fix a Samsung Galaxy Watch that won’t update

How to fix a Samsung Galaxy Watch that won’t update

Once Samsung releases firmware upgrades, the Samsung Galaxy Watch should be appropriately updated. I cannot emphasize how crucial such upgrades are, which is why it is suggested that the firmware be updated as soon as the new version is released. However, some customers have reported that their watches would not download or install the latest version, and if you are presently experiencing issues with it, the issue may not be resolved till the update is installed.

In this post, I will walk you thru troubleshooting your Galaxy Watch, which is unable to upgrade its software. I’ll share with you a way that many owners have used to repair their own gadgets. So, if you’re one of the customers experiencing this issue, keep reading since this article may be able to assist you.

If you’re seeking a solution to a different issue, visit our Galaxy Watch troubleshooting page, where we’ve previously addressed some of the phone’s most prevalent concerns. Browse the website for situations that are comparable to yours and use the remedies we provide. If they don’t work for you or if you still need our assistance, please contact us at any time using our questionnaire.

If your Galaxy Watch isn’t updating properly, here’s what you need do…

  1. To refresh the memory on your Galaxy Watch, restart it.
  2. Restart the connection between your phone and your watch.
  3. The Galaxy Watch should be factory reset before being updated.

The first step is to refresh your device’s memory, which can only be accomplished by a forced restart. Hold down the Power button until the message “Rebooting…” appears, then release it. The screen will go dark, followed by a reboot of the watch. When the watch is linked to your phone during the reboot, the devices will briefly disconnect. Once it has reconnected to the phone, launch the Galaxy Wearable app on your Android device and select the SETTINGS tab. Then, tap About watch, and then tap Update watch software. Based on several reports from people who have encountered this issue, they have solved it by following this technique, therefore I am hopeful that it will work for you as well.

If the problem persists after completing the first process, you must renew the connection between your phone and your watch. That implies you’ll have to remove their current connection and then re-add the watch. To reset the network settings, do the following:

  1. Ascertain that the Galaxy mobile is Bluetooth-paired with the Galaxy Watch.
  2. Launch the Galaxy Wearable App.
  3. Select Settings.
  4. Select Mobile Networks.
  5. Select Delete.
  6. When the Turn Off T-Mobile Network pop-up appears, touch it.
  7. You will be sent back to the settings page.
  8. Select Mobile Networks.
  9. Tap the settings icon next to “CONVSIM” under “select network”.
  10. Select Delete.
  11. A T-Mobile Network pop-up window will appear.
  12. To agree, select the radio button.
  13. Select Delete.

This eliminates the chance that the issue is caused by an unstable connection between the two. If this still fails, your only option is to reset your Galaxy Watch, set it up again, and then download the latest firmware update. As a result, create a backup of any vital files or data saved in your watch’s internal storage, as they will be lost throughout the procedure. Once everything is in place and ready on your watch, proceed with the following steps to reset it:

  1. Make a backup of your data on the internal memory.
  2. Turn off the Galaxy Watch.
  3. Hold down the Power button until REBOOTING appears at the bottom of the screen.
  4. Press the Power button three times fast until the Select REBOOT MODE screen appears.
  5. To highlight ‘Recovery,’ press the Power key multiple times.
  6. To select, press and hold the Home key for three seconds, or until the Galaxy Watch reboots.

I hope this troubleshooting tutorial might assist you in resolving the issue with your Samsung Galaxy Watch. Please let us know in the comments what worked for you or what you did to resolve the issue with your device.

Editor’s Choice :

no SIM card detected error on Samsung Galaxy A53

Leave a Reply