We are going to Flash Stock Rom on Blu Dash JR TV D141T. In this guide, we have used SP Flash Tool to flash the Stock Firmware on Blu Dash JR TV D141T. And we include an Official link to Download Blu Dash JR TV D141T Stock ROM and all Needed Files. your device may get bricked And flashing stock ROM is the only way to go out. To perform this advanced process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.
Why SP – Smart Phone flash tool?
SP flash tool which is also known as the Smart Phone flash tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom, and to fix the hard brick device. This is a very user-friendly tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support devices having chipsets other than MediaTek. Read More – Check whether my one is Mediatek or any else
Why I want to Flash Stock Firmware
If you have an Android device, you may require flashing Stock ROM/Firmware under various circumstances. If you have flashed custom ROM, Custom recovery, or Custom kernel and facing several issues or if you want to Full Unroot, Unbrick, Rollback, then you have to flash stock ROM to bring your device back to its original state. Read More – Stock Rom vs Custom Rom
If you need to upgrade your Blu then you have to find upgraded Stock/Custom Rom – Android Q, Pie, Oreo, Nougat. we provide only Official Rom because all the glitches and bugs are debugged and you can get the latest OTA update and install them
Flash Stock Rom on Blu Dash JR TV D141T
- Read More – Increase RAM SIZE after root on Blu?
- Download Stock Firmware – Blu_Dash_JR_TV_D141T_MT6571_V06_141029_4.4.zip. – Link is below
- Download latest SP flash tool
- Original USB cable and working PC.
- Make sure you have a complete backup of your device
- Maintain the battery charge percentage at least 60%.
Proceed at your own risk. flashstockrom.com will not be responsible for any mistake and any damage that might occur to your device while performing the following operation. Don’t skip any step. Full Guide about SP Flash Tool – For beginners
Preparation for Flashing Stock Firmware on Blu Dash JR TV D141T
STEP 1 :
- First Get Full Back up of your Blu.
- Download and install Android USB Driver on you pc. In case Android
USB drivers are already installed on your computer then skip this step.
STEP 2 : After that power off your Blu.
Download Stock rom For Blu Dash JR TV D141T
STEP 5 :
- Open Flash_tool.exe (you will find this from the extracted Sp Flash files)
- After that, if any Warning pop-up appears on your screen click YES.
STEP 6 : After that, click on the Download Tab when the Smart Phone Flash Tool is launched,.
STEP 7: In the Download Tab, you should click on the scatter-loading button.
STEP 8 : After that Locate the scatter file (you will find the scatter file in the Stock ROM folder).
now press on Download button just below the Download tab. Read More – Enable OTG support on Blu Device
STEP 9: After that, connect your device to your computer using a USB cable. Just press the volume buttons a couple of times so that the computer detects your device.
Installing Stock Rom on Blu Dash JR TV D141T
STEP 10: Then The flashing will begin automatically Once your device is recognized, Read More – Increase Internal Rom SIZE After Root on Blu.
STEP 11: Finally when the process is completed a Green Ring will appear .
Frequently Asked Questions Listed Below
I can’t Flash Stock Firmware on Blu Dash JR TV D141T.
Follow Above Ultimate Guide Step By Step. Do it again with fresh SP Flash Tool and Fresh Firmware. Your problem persists then Leave a Comment With Full details about the error (If you can upload ScreenShot, upload it). Then our team will help you.
Blu doesn’t turn on, or respond to power button ( Dead/Soft Brick).
- Make sure a formatted SD CARD is present in the phone before proceeding to flash.
- After that Give up to 15mins for first boot.
- Finally Find Rom from alternative source.
- Read More
Blu Dash JR TV D141T Doesn’t not pass boot logo/bootloop
After Flashing, the Blu phone doesn’t pass the boot logo that means, there is something wrong with your Blu Dash JR TV D141T. However, let it start for 15 minutes at least because this is the first boot. After that, if any Problem persists then Try to hard reset and do the Flash again.
Blu Dash JR TV D141T stuck at boot/ continuously restarts/ keep rebooting
the first time it may give this kind of things. wait and watch. Normally The first boot may be slow. if the Problem persists then Try to hard reset and do the Flashing Stock firmware on Blu Dash JR TV D141T again with fresh Files.
Phone automatically disconnecting during flashing
- Try changing the USB-port
- After that run Sp Flash Tool as ADMIN.
- Make sure you have the correct drivers installed (see here)
- if any Problem persists, try another PC and USB cable.
USB device not recognized
This error is not associated with the SP Flash Tool or the Blu Dash JR TV D141T firmware. It’s a bug in your computer. So, first, you need to fix it or use another computer or laptop. We wrote an article on how to fix this “USB not recognized” problem. Check it out and fix your problem. Read here.
Initialize scatter file failed. Please check the scatter file name you load is legal
- Make sure the scatter file was not renamed previously. If you’re sure that the scatter file’s name was unaltered, then try using a higher version of SP FLASH TOOL.
- Read More
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
- Make sure that the file(s) you’re trying to flash are actually for your exact phone model
- After that ensure you tick the boxes for only the files present in the ROM you’re about to flash
- You probably might have the wrong driver installed. Uninstall VCOM, PRELOADER and MTK drivers using USB DEVIEW then manually re-install using this Read More
4001 ERROR – S_FT_DA_NO_RESPONSE or Da didn’t send response data to FlashTool!
- Try changing the USB-port
- After that Then run SP FLASH TOOL as ADMIN.
- also make sure you have the correct drivers installed
- Read More.
BROM ERROR: S_FT_DOWNLOAD_FAIL (4008)
• After that Try using a higher version of SP FLASH TOOL.
• After that try changing the USB cable and port or the PC itself.
• Read More.
Blu Device auto restarting
- It may be your Blu case is pressing on it (Clean the power button.)
- or May be, your current stock Rom is damaged or Corrupted. So you have to Install Stock Rom/custom Rom to your device. use this post to Flash new Stock Rom.
We have a Dedicated post “list of sp flash tool errors and Solutions” guide. So you can fix all of the below errors from it. Is your error not here? then Comment on it below.
Sp Flash tool remains at 0%
BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)
Error 8038! Android download pmt is ready and layout has been changed
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail
The BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069)
BROM ERROR : S_FT_DOWNLOAD_FAIL (4008)
The BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
BROM ERROR: S_CHIP_TYRE_NOT_MATCH(3168)
The BROM ERROR : S_FT_DOWNLOAD_FAIL (2004)
The BROM ERROR:S_COM_PORT_OPEN Fail(1013)
BROM ERROR : S_BROM_CHKSUM16_MEM_RESULT_DIFF (2020)
The BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
BROM ERROR : S_FT_FORMAT_FAIL
The BROM ERROR: S_STORAGE_NOT_MATCH (3182)
BROM ERROR: S_TIMEOUT (1042)
SP FLASH TOOL ERROR (8406)
BROM ERROR: S_NOT_ENOUGH_MEMORY (1012)
The BROM ERROR : S_DA_UPDATE_BOOLOADER_EXIST_MAGIC_NOT_MATCHED
BROM ERROR: S_SECURITY_SECURE_USB_DL_IMAGE_HASH_FAIL
BROM ERROR: SP FLASHTOOL ERROR 6010 CODE DOWNLOAD FORBIDDEN
The BROM ERROR: S_FT_GET_MEMORY_FAIL (0xFDA)
PRO_INFO: Failed to get PMT info
BROM ERROR: S_SECURITY_INVALID_PROJECT (6124), MSO ERROR CODE: 0X00
BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)
The BROM ERROR: S_CHKSUM_ERROR (0X411)
BROM ERROR: S_FT_NAND_READLEN_NOT_ALIGNMENT (4017)
TOOL DL image Fail !
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (0xFC0)
The BROM ERROR: STATUS_DOWNLOAD_EXCEPTION (0xC0050003)
BROM ERROR: STATUS_SEC_IMG_TYPE_MISMATCH (0xc002002A)
The BROM ERROR: S_FT_DOWNLOAD_FAIL (0XFA8)
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
The BROM ERROR : S_CHIP_TYPE_NOT_MATCH (3179)
BROM ERROR : S_DL_READ_PT_FAIL (5073)
Thank you for coming to our Page. If this page helped you, So then please share this “Flash Stock Firmware on Blu Dash JR TV D141T” Post to all Social media like Facebook, Twitter, and Reddit so then Others can find this Blu Guide. Finally, If you have any problems then don’t hesitate, feel free to Leave a Comment with an Error Message. So one of the team our team members will help you as soon as possible.